User's Manual

Cipherium Repeater
Administrator’s Manual
64
3. Enable DHCP Relay: Enable the DHCP Relay mode. If you want to set up this mode, it
is necessary to specify another DHCP Server IP address.
Figure 5-45 Enable DHCP Relay on Private LAN
5.2. User Authentication
This option provides to Administrator the advanced system set up according to the following
detailed items including Authentication Policies, Group Configuration, Black List
Configuration, Guest User Configuration, Roaming Configuration, Additional
Configuration and On-demand User configuration.
5.2.1 Authentication Policy
The Repeater provides a simple interface simplifying the complicated management setup, and
the system provides a total of 5 management setups. Administrator can adopt different
Authetication methods according to each management setup. Each management setup has at
most 20 management rules to go with the group configuration, so that the management on
general users is once more diversified and flexible. Administrator can select the desired
management set up through the pull-down menu. In addition, a layer 2 Authentication is also
possible.
Figure 5-46 Example of Authentication Policy(1)