User's Manual

Cipherium Repeater
Administrator’s Manual
61
5.1.5. Private Configuration
Set up the Specific Route Profile rule, execution mode, IP address, and Subnet Mask of
Private LAN Port as shown in the following figure.
Figure 5-41 Example of Private LAN Interface
Specific Route Profile: From the pull-down menu, select your desired Specific Route Profile
rule or select “None”.
Mode: It provides two modes: NAT Mode and ROUTER Mode.
NAT Mode：All IP addresses externally connected through the Private LAN Port (these
IP address must belong to the same subnet as the Private LAN Port) will be converted
into the IP address of the WAN Port by the Repeater and connected to the outside