User's Manual

Cipherium Repeater
Administrator’s Manual
54
SSID must be the same for all devices in the wireless network. It is case sensitive, must not
exceed 32 characters, and may be any keyboard character.
Auto Channel Select: The system will automatically select the appropriate channel.
Chanel : Select the appropriate channel from the list to correspond with your network settings,
between 1 and 11 (in North America). All points in your wireless network must use the same
channel in order to make sure its correct functioning.
Transmission Mode : There are 3 mode you can select, 11b-only (2.4G,1~11Mbps),
11g-only (2.4G,54Mbps) and Mix mode(b and g)
SSID broadcast: Allows the SSID to be broadcast on your network. You may want to enable
this function while configuring your network, but make sure to disable it when you finished.
With this enabled, someone could easily obtain the SSID information with site survey
software and get unauthorized access to your network. Click Enable to broadcast. Click
Disable to increase network security and prevent the SSID from being seen on networked
Figure 5-33 Security setting
WEP Key(Wired Equivalent Privacy)A data privacy mechanism based on a 64-
bit, 128-bit, or 256-bit shared key algorithm, If you do not wish to utilize WEP encryption,
make sure the Disabled is selected.