User's Manual

Cipherium Repeater
Administrator’s Manual
50
IP PNP: At the user end, you can use any IP address to connect to the machine at the Public
LAN section; no matter what the IP address at the user end is, you can obtain the Public
LAN from Repeater and access the network resources properly, suppose you had used static
IP address and specified IP address, Subnet Mask, Default Gateway and DNS.
User Public LAN: You can choose to Enable or Disable user Public LAN, if you enable user
authentication, you have to define Specific Route Profile to user .
Specific Route Profile: To define specific route for user to access internet.
Operation Mode: It provides two modes: NAT Mode and ROUTER Mode.
IP Address: Enter your desired IP address for setup.
Subnet Mask: Enter your desired Subnet Mask for setup.