User's Manual

Cipherium Repeater
Administrator’s Manual
42
7. Set Wireless – Access Point Connection
Please enter SSID name and select a channel and the AP mode, then click next.
Figure 5-17 Set Wireless – Access Point Connection
Caution: This device can support Channel 1-13. When using in other plcace as Taiwan,
USA, Channel 12, 13 will be disabled by software and only Channel 1-11 are applicable.
8. Configure Wireless port’s information
This procedure sets the related information of the Wireless port as shown in Figure 5-18.
Please enter IP and Subnet Mask, and determine to Enable or Disable the DHCP.