User's Manual

Cipherium Repeater
Administrator’s Manual
23
Click “Run Wizard” and the configuration wizard will guide you through the seven steps to
complete the setup.
Please refer to Chapter 5.1.1 “Configuration Wizard” for the detailed description.
.
3.2.3.2. Accessing External Network from Network Section Managed by
System
If all the steps are set properly so far, we can further connect the Repeater to the managed
network to experience the controlled network access environment. First, connect a user-end
device to the network at the Repeater Public LAN, and set the dynamic access network.
After the network address is obtained at the user end, open an Internet browser, and link to any
website. Then, the default login webpage will appear in the Internet browser.
Figure 3-6 Entering Username and Password
bonalinx W-5101