User's Manual

Cipherium Repeater
Administrator’s Manual
4
(Back Side)
WAN Port
The WAN port is connected to a network which is not managed by the Repeater system, and
this port can be used to connect the ATU-Router of ADSL, the port of Cable Modem, or the
Switch or Hub on the LAN of a company.
Public LAN Port
The Public LAN port is used to connect to the desired network for management or WLAN,
and all users connected to the Public LAN must login successfully before using the network
resources.
WAN Port
can be
connected to
the Internet or
Intranet by
Switch.
Public LAN Port
can be connected to the open
network environment managed
by the system, and requires
authentication before logging on
to the Internet.
Reset button
resumes the
factory defaults
or reconfigures
the system. We
recommend
you to set this
configuration
b
y
ex
p
erts.
RJ11 Port
can be console
interface or
printer
interface.
Private LAN Port
can be connected to
the trustful Intranet
environment by
Switch without
authentication for
logging on to the
Internet.
DC Power
Socket