User's Manual

Cipherium Repeater
Administrator’s Manual
118
7 Appendix - Windows TCP/IP Setup
If you have not changed the factory default settings of the Repeater and Windows
95/98/ME/2000 TCP/IP, it is not necessary to make any modification here. With the factory
default settings, the Repeater will automatically assign an appropriate IP address (and related
information) to each PC after the PC has been booted.
If the version of Windows operating system is not for servers, the default TCP/IP settings will
treat the PC as the DHCP client. You can check the TCP/IP setup according to the following
procedure:
7.3 Check the TCP/IP Setup of Windows 9x/ME
1. Select Start -Console –Network.