User's Manual

Cipherium Repeater
Administrator’s Manual
107
Resetting to the Factory-Default configuration: Restore to the default setting of Repeater.
5.5.3 Firmware Upgrade
You can upgrade your Repeater firmware from the Cipherium website.
Figure 5-100 Executing the Firmware Upgrade
Warning: Firmware upgrade may cause data loss. Please refer to the version description
to see if there is any limitation before upgrading your firmware.
Click “Browse” to browse the files. After you have found the firmware image file, click
“Submit” and the browser will upload such file to Repeater, and then the system will start
upgrading the file.
You must restart the system before the upgrade firmware is effective. If you have modified any
setting, remember to save the setting before restarting the system.
Warning: Please restart the system through the management interface. Do not turn off the
system directly and then turn on the power again. Doing so may damage the upgraded
firmware.