User's Manual

Cipherium Repeater
Administrator’s Manual
98
5.4.2 Privilege List
1. Privilege IP Address List
Although all devices at the user end are managed, sometimes you still need to have a user end
with some exception processing. For example, if the server has been put on the managed
network and you want to login to the network from such server without going through the
Public LAN. To permit a specific device at the user end to have the network access right
without going through the Public LAN, you only have to key in the IP address at user end, as
shown in Figure 5-90 privilege IP address. This system allows at most 100 Privilege IP
addresses. These settings will take effect immediately after you click “Apply”.
Warning: Permitting certain IP address to have network access rights without going
through standard authentication process at the Public LAN may cause security problems.