User's Manual

Cipherium Repeater
Administrator’s Manual
95
After the static route is changed, it is necessary to restart Repeater to refresh the setting.
5.3.3 Login Schedule Profiles
The user’s login schedule can be set. After the setup is completed, please click “Apply” to
save the settings in Repeater.
Figure 5-87 Example of Guest Login Schedule Management Interface
5.4 Network Configuration
Five functions are provided to control individual jobs of the network transmission, which
include Network Address Translate, Privilege List, Walled Device list, and Proxy Server
Properties.
5.4.1 Network Address Translate
1. Static Assignments
If you have several IP addresses, you can assign them to the WAN port of Repeater. You can
define at most 40 groups for the correspondence combination at the Ethernet end (Virtual IP
Address) and WAN end (Public IP Address). The WAN port of Repeater will automatically set
the public address defined here. These settings will be effective immediately after you click