User's Manual

Cipherium Repeater
Administrator’s Manual
93
Pass：The packet passes successfully.
Block：The packet is blocked.
Protocol: Provides three kinds of protocols: TCP, UDP, and ICMP for your choice. All stands
for all three protocols chosen.
Source MAC: Source Address of the MAC Address.
Source (Destination) IF: Source (Destination) Interface includes 4 interfaces: WAN,
Public LAN, Private LAN and wireless for your choice. ALL stands for all the four interfaces.
Source (Destination) IP Address: IP address of Source (Destination).
Source (Destination) Subnet Mask: Subnet Mask of Source (Destination).
Source (Destination) Operator: Provides the comparison rules: =(Equal), != (Not Equal),
> (Larger Than), and < (Less Than).
Source(Destination) Start Port: Start Port of Source (Destination)。
Source(Destination) End Port: End Port of Source (Destination)。
5.3.2 Specific Route Profiles
The Repeater system provides the route profile setup function, letting Administrator to
determine the network path which suits all routers best and send the packet to the destination
through network. Administrator can use the pull-down menu to select and set your desired
route profile.