User's Manual

W1310R
User’s Manual
105
 Privilege IP Address List
If there are some workstations belonging to the managed server that need to access the network without
authentication, enter the IP addresses of these workstations in this list. The “Remark” blank is not necessary
but is useful to keep track. W1310R allows 100 privilege IP addresses at most. These settings will become
effective immediately after clicking Apply.
Warning: Permitting specific IP addresses to have network access rights without going through standard
authentication process at the Public LAN (LAN1/LAN2) may cause security problems.
 Privilege MAC Address List
In addition to the IP address, the MAC address of the workstations that need to access the network without
authentication can also be set in this list. W1310R allows 100 privilege MAC addresses at most.
When manually creating the list, enter the MAC address (the format is xx:xx:xx:xx:xx:xx) as well as the remark
(not necessary). These settings will become effective immediately after clicking Apply.
Warning: Permitting specific MAC addresses to have network access rights without going through standard
authentication process at the Public LAN (LAN1/LAN2) may cause security problems.