User's Manual

W1310R
User’s Manual
53
2. On-demand User: This is for the customer’s need in a store environment. When the customers need to use
wireless Internet in the store, they have to get a printed receipt with username and password from the store
to log in the system for wireless access. There are 2000 On-demand User accounts available.
Server Status: The status shows that the server is enabled or disabled.
Postfix: Set a postfix that is easy to distinguish (e.g. Local) for the server using numbers (0 to 9), alphabets
(a to z or A to Z), dash (-), underline (_) and dot (.) with a maximum of 40 characters, all other letters are not
allowed.
Receipt Header: There are two fields, Receipt Header 1 and Receipt Header 2, for the receipt’s header.
Enter receipt header message or use the default.
Receipt Footer: Enter receipt footer message here or use the default.
Printer Baud Rate: Select the desired transmission baud rate. The default value is 9600.
Monetary Unit: Select the desired monetary unit.
Policy Name: Select a policy for the on-demand user.
WLAN ESSID: Enter the ESSID of the AP. Administrators can supply a new name or use the default name.
Wireless Key: Enter the Wireless key of the AP such as WEP or WPA.
Remark: Enter any additional information that will appear at the bottom of the receipt.