User's Manual

W1310R
User’s Manual
76
4.2.1.4 Authentication Method – LDAP
Choose “LDAP” in the Authentication Method field, the hyperlink beside the pull-down menu will become “LDAP
Setting”.
Click the hyperlink for further configuration. Enter the related information for the primary server and/or the secondary
server (the secondary server is not required). The blanks with red star are necessary information. These settings will
become effective immediately after clicking the Apply button.
 Server IP: Enter the IP address or domain name of the LDAP server.
 Port: Enter the Port of the LDAP server, and the default value is 389.
 Base DN: Enter the distinguished name of the LDAP server.
 Account Attribute: Enter the account attribute of the LDAP server.