User's Manual

W1310R
User’s Manual
75
 802.1X Authentication: Enable this function and the hyperlink of Radius Client List will appear. Click the
hyperlink to get into the Radius Client Configuration list for further configuration. In the Radius Client
Configuration table, the clients, which are using 802.1X as the authentication method, shall be put into this
table. W1310R will forward the authentication request from these clients to the configured Radius Servers.
 Trans Full Name: When enabled, the ID and postfix will be transferred to the RADIUS server for authentication.
When disabled, only the ID will be transferred to RADIUS server for authentication.
 NASID: Enter the NASID of the W1310R for the external RADIUS authentication server.
 Server IP: Enter the IP address/domain name of the RADIUS server.
 Authentication Port: Enter the authentication port of the RADIUS server and the default value is 1812.
 Accounting Port: Enter the accounting port of the RADIUS server and the default value is 1813.
 Secret Key: Enter the key for encryption and decryption.
 Accounting Service: Select this to enable or disable the “Accounting Service” for accounting capabilities.
 Authentication Protocol: There are two methods, CHAP and PAP for selection.