User's Manual

W1310R
User’s Manual
73
4.2.1.2 Authentication Method – POP3
Choose “POP3” in the Authentication Method field, the hyperlink beside the pull-down menu will become “POP3
Setting”.
Click the hyperlink for further configuration. Enter the related information for the primary server and/or the secondary
server (the secondary server is not required). The blanks with red star are necessary information. These settings will
become effective immediately after clicking the Apply button.
 Server IP: Enter the IP address/domain name given by the ISP.
 Port: Enter the Port given by the ISP. The default value is 100.
 Enable SSL Connection: If this option is enabled, the POP3 protocol will perform the authentication.