User's Manual

W1310R
User’s Manual
17
4-1. Using DHCP: If want to use DHCP, please
choose “Obtain an IP address automatically”
and click OK. This is also the default setting of
Windows. Then, reboot the PC to make sure an
IP address is obtained from W1310R.
4-2. Using Specific IP Address: If using specific IP address is desired, ask the network administrator for the
information of the W1310R: IP address, Subnet Mask, New gateway and DNS server address.
Caution: If your PC has been set up completed, please inform the network administrator before proceeding to the
following steps.
 Please choose “Use the following IP
address” and enter the information given
from the network administrator in “IP
address” and “Subnet mask” If the DNS
Server column is blank, please choose
“Using the following DNS server
addresses” and then enter the DNS
address or the DNS address provided by
ISP and then click OK.