User's Manual

W1310R
User’s Manual
11
3.1.3 Panel Function Descriptions
Front Panel
Rear Panel
 DC IN: The power adaptor attaches here.
 RESET: Press this button to restart the system.
 WAN: The WAN port is used to connect to a network which is not managed by the W1310R system, and this
port can be used to connect the ATU-Router of ADSL, the port of Cable Modem, or the Switch or Hub on the
LAN of a company.
 LAN1/LAN2: The two LAN ports are connected to the managed network or WLAN. They can be selected to
require or not require authentication to access network resources and Internet.
 LAN3/LAN4: The two LAN ports are connected to a trustful network where the users can always use the
network resources without authentication. This port can be connected to a server such as File Server or a
Database Server, etc.
 Console: The system can be configured via HyperTerminal. For example, if you need to set the Administrator’s
Password, you can connect a PC to this port as a Console Serial Port via a terminal connection program (such
as the super terminal with the parameters of 9600, 8, N, 1, None flow control) to change the Administrator’s
Password.