Product Info
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 3 Operating Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
PLS83-X Hardware Interface Overview
5.4 Compliance with FCC/IC/ISED Rules and Regulations
41
t PLS83-X_HIO_v00.860 2021-02-22
Confidential / Preliminary
Page 40 of 61
5.4 Compliance with FCC/IC/ISED Rules and Regulations
The Equipment Authorization Certification for the Thales reference application described in
Section 5.3 will be registered under the following identifiers:
FCC Identifier: QIPPLS83-X
ISED Certification Number: 7830A-PLS83X
Granted to THALES DIS AIS Deutschland GmbH
Manufacturers of mobile or fixed devices incorporating PLS83-X modules are authorized to use
the FCC Grants and ISED Certificates of the PLS83-X modules for their own final products ac-
cording to the conditions referenced in these documents. In this case, an FCC/IC label of the
module shall be visible from the outside, or the host device shall bear a second label stating
"Contains FCC ID: QIPPLS83-X”, and accordingly “Contains IC: 7830A-PLS83X“. The integra-
tion is limited to fixed or mobile categorized host devices, where a separation distance between
the antenna and any person of min. 20cm can be assured during normal operating conditions.
For moble and fixed operation configurations the antenna gain, including cable loss, must not
exceed the limits listed in the following Table 10 for FCC and ISED
Table 10: Antenna gain limits for FCC and ISED
IMPORTANT:
Manufacturers of portable applications incorporating PLS83-X modules are required to have
their final product certified and apply for their own FCC Grant related to the specific portable
mobile. This is mandatory to meet the SAR requirements for portable mobiles (see Section 5.2
for detail).
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
Operation band FCC limit ISED limit Unit
Maximum gain in WCDMA Band 2 8.01 8.01 dBi
Maximum gain in WCDMA Band 4 5.00 5.00 dBi
Maximum gain in WCDMA Band 5 9.40 6.10 dBi
Maximum gain in LTE Band 2 8.01 8.01 dBi
Maximum gain in LTE Band 4 5.00 5.00 dBi
Maximum gain in LTE Band 5 9.40 6.10 dBi
Maximum gain in LTE Band 12 8.70 5.61 dBi
Maximum gain in LTE Band 13 9.16 5.93 dBi
Maximum gain in LTE Band 14 9.23 N.A. dBi
Maximum gain in LTE Band 25 8.01 8.01 dBi
Maximum gain in LTE Band 26 9.30 6.10 dBi
Maximum gain in LTE Band 66 5.00 5.00 dBi
Maximum gain in LTE Band 71 8.48 5.45 dBi