Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Antenna Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
PLSx3 Hardware Interface Description
3.2 Power Up/Power Down Scenarios
89
t PLSx3_HID_v01.002d 2021-08-24
Public / Released
Page 72 of 129
factory setting AT^SCTM=0 was never changed.
The maximum temperature ratings are stated in Section 3.6. Refer to Table 17 for the associ-
ated URCs.
Table 17: Temperature associated URCs
Sending temperature alert (2min after PLSx3 start-up, otherwise only if URC presentation enabled)
^SCTM_B: 1 Board close to overtemperature limit.
^SCTM_B: -1 Board close to undertemperature limit.
^SCTM_B: 0 Board back to non-critical temperature range.
Automatic shutdown (URC appears no matter whether or not presentation was enabled)
^SCTM_B: 2 Alert: Board equal or beyond overtemperature limit. PLSx3 switches off.
^SCTM_B: -2 Alert: Board equal or below undertemperature limit. PLSx3 switches off.