Specifications

Cinterion
®
PLSx3 Hardware Interface Description
6.1 Revision History
125
t
PLSx3_HID_v01.002d 2021-08-24
Public / Released
Page 120 of 129
Proceeding document: "Cinterion
®
PLSx3-W Hardware Interface Description" Version 00.012
New document:
"Cinterion
®
PLSx3 Hardware Interface Description" Version 00.024
Proceeding document:
"Cinterion
®
PLSx3-W Hardware Interface Description" Version 00.002
New document:
"Cinterion
®
PLSx3-W Hardware Interface Description" Version 00.012
Proceeding document:
"Cinterion
®
PLSx3-W Hardware Interface Description" Version 00.001
New document:
"Cinterion
®
PLSx3-W Hardware Interface Description" Version 00.002
3.6 Added Electrostatic Discharge section.
4.3.1.2 Added Figure 44.
4.3.2.2 Added Figure 48 and Table 27.
5 Added chapter 6 Regulatory and Type Approval Information.
7.2 Added Module Label Information section.
3.2.1 Updated Figure 27 and the description of IGT signal.
2.1.2 Updated Ignition signal description in Table 3.
Chapter What is new
-- Added new variants of -X, -EP, -LA and -J as well as their supported bands.
-- Update the height of the module.
2.1.1 Updated the pad assignment. Update the number of GPIO to 22.
2.1.6 Updated Figure 10.
2 Added the following chapters: 2.1.10.1, 2.2, 2.3, 2.4.
3.2.5 Added Automatic Shutdown section.
3.4.1 Updated power consumption.
3.5 Added Operating Temperatures section.
-- Removed TX-activity.
Chapter What is new
2 Added the following new sections: 2.1.7, 2.1.8.1, 2.1.10, 2.1.6.1
3 Added the following new sections: 3.2.2, 3.2.4
4 Added the following new sections: 4.2.4, 4.3
2.1.1 Updated the pad assignment
1.3 Updated Figure 1
- Updated company name and logo.
Chapter What is new
1.4 Updated the Figure 2.
2.1 Added the following new sections: 2.1.3, 2.1.4 2.1.5, 2.1.6
3 Added section 3.2