Installation Guide

Mounting the external GNSS antenna
If you install the LINK 740 in a position where it has poor GNSS reception, you need to use the external
GNSS antenna accessory from Webfleet Solutions, which comes with an integrated magnet and an adhe-
sive pad. The external GNSS antenna from Webfleet Solutions is not part of the standard LINK 740 product
package.
Important
Only use the GNSS antenna from Webfleet Solutions, otherwise GNSS performance may be poor or not
work at all.
Tinted metallised windscreens or those with integrated filament heating may prevent good GNSS reception.
In this case, place the GNSS antenna in the rear window or on the outside of the vehicle.
The magnet of the antenna remains attached to the outside of the car at speeds of up to 180 km/h.
Install the GNSS antenna in a position where it has a clear view of the sky and is unobstructed by metal ob-
jects.
The GNSS antenna must be placed with the adhesive pad on an oil free, dry and clean surface.
Extreme temperature changes or differences can affect the adhesive property of the pad.
To mount your external GNSS antenna, do the following:
1. Remove the rubber cap from the GNSS antenna connector.
2. Insert the plug of the GNSS antenna into the GNSS antenna connector on the LINK 740.
18