Installation Guide
Manuals
Brands
CINTERION Manuals
Telematics
Telematic Device
1
2
3
4
5
6
7
8
9
10
Table Of Contents
Installation
Read me first
Congratulations
What’s in the box
What you need for the installation
Safety first
Important safety notices and warnings
Connection overview
Connection overview: Power/CAN cable
Connection overview: 12 PIN IO cable
Connection overview: 1 wire
Connecting to the CAN bus
Connecting to power
Choosing the correct position
Mounting the LINK 740
Attaching the holder using the adhesive strip
Attaching the holder using self-tapping screws
Mounting the external GNSS antenna
Testing operation
Testing operation with the LINK Toolkit app
Power or Ignition test
Mobile network reception test
Activating the LINK 740
Diagnostics
Monitoring operation
Support
Resetting the LINK 740
Restarting your LINK 740
Resetting your LINK 740 to factory settings
Technical data
Appendix: Using the I/O connector
Wiring digital inputs
Wiring the digital output
Using the IN and OUT for changing the logbook mode
Using the input IN for changing the logbook mode
Using the input IN for idle time reporting
Addendum
Webfleet Solutions Limited Warranty
Damage to the device
Short-circuits inside the unit can be caused by contact with water or other liquids. The unit may be dam-
aged by contact with water. Use and store the unit in an area protected fr
om water.
10
1
...
...
8
9
10
11
12
...
...
46
