User's Manual

4/18
1 Introduction
This specification is an instruction manual for a 4G compatible communication terminal (JRN-360
T).
JRN-360T is a small terminal for Construction equipment to have the GNSS measurement functi
on and the 4G/3G/GSM communication function, and to use it for management and positional inf
ormation track etc. of the Construction equipment. (JRN-360T is a device dedicated to specific cu
stomers and will not be sold to the general public.)
1.1 Overview
communication unit equipped with GSM / W-CDMA / FD-LTE packet data communication functi
on and GNSS reception function.
As a communications protocol TCP / IP / PPP are mounted.
■Frequency bands
GSM : GSM850, GSM900, GSM1800, GSM1900
W-CDMA : B1, B2, B4, B5, B8, B19
FD-LTE : B1, B2, B3, B4, B5, B7, B8, B12, B18, B19, B20, B28
2 Composition
NO. 品名 型名 数量
1 Communication terminal JRN-360T 1
1-1 2G/3G/4G Communications Module
Cinterion PLS63-W
(THALES product)
1
1-2 Communication antenna
CAU-7360TA
*Built-in antenna
1
1-3 SIM Interface e-SIM 1
2 GNSS antenna 7ABLE0008 1
(Note #1) ECU connection and battery cable are not included.