Specifications

Cinterion
®
EHS5-E/EHS5-USR4 Hardware Interface Overview
1 Introduction
11
 ehs5_hio_v04.000 2019-01-16
Confidential / Preliminary
Page 7 of 46
1 Introduction
This document
1
describes the hardware of the Cinterion
®
EHS5-E/EHS5-USR4 module. It
helps you quickly retrieve interface specifications, electrical and mechanical details and infor-
mation on the requirements to be considered for integrating further components.
1.1 Key Features at a Glance
1. The document is effective only if listed in the appropriate Release Notes as part of the technical docu-
mentation delivered with your Gemalto M2M product.
Feature Implementation
General
Frequency bands EHS5-E:
GSM/GPRS/EDGE: Dual band GSM 900/1800MHz
UMTS/HSPA+: Dual band UMTS 900/2100MHz
EHS5-USR4:
GSM/GPRS/EDGE: Dual band GSM 850/1900MHz
UMTS/HSPA+: Dual band UMTS 850/1900MHz
GSM class Small MS
Output power (according
to Release 99, V5)
EHS5-E:
Class 4 (+33dBm ±2dB) for EGSM900
Class 1 (+30dBm ±2dB) for GSM1800
Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK
Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI
Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII
EHS5-USR4:
Class 4 (+33dBm ±2dB) for EGSM850
Class 1 (+30dBm ±2dB) for GSM1900
Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK
Class 3 (+24dBm +1/-3dB) for UMTS 1900,WCDMA FDD BdII
Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV
Power supply 3.3V to 4.5V
Operating temperature
(board temperature)
Normal operation: -30°C to +85°C
Extended operation: -40°C to +90°C
Physical Dimensions: 27.6mm x 18.8mm x 2.3mm
Weight: approx. 3g
RoHS All hardware components fully compliant with EU RoHS Directive