Project/Product/Process Author Project/product and doc ID Pages Publish Date Project: 1032 Salah Alazawi 103250101 11 2020-10-05 Title Distribution Document Class Template Rev Revision & Status User Manual Actia Group VC - Version Controlled 1.1 1 .2 Released 103250101 User Manual Copyright © 2018 ACTIA NORDIC AB ACTIA Nordic AB SWEDEN info@actia.se www.actia.
Title Revision & Status Doc Id Distribution User Manual Rev 1.2 Released 1032-[Subject] Actia Group Page (No Pages) 1 CONTENTS 2 3 Introduction ................................................................................................................................................. 3 2.1 Revision history ..................................................................................................................................3 2.2 Abbreviations......................................
Title Revision & Status Doc Id Distribution User Manual Rev 1.2 Released 1032-[Subject] Actia Group 2 INTRODUCTION This document describes how to set up the 103250101 for certification testing. 2.1 REVISION HISTORY Revision Date Author(s) Cause of changes Updates 1.0 2018-11-28 Salah Alazawi Release First release 2019-09-26 Salah Alazawi LTE bands correction, safety warning added Second release 1.1 2.
Title Revision & Status Doc Id Distribution User Manual Rev 1.2 Released 1032-[Subject] Actia Group 3 OVERVIEW 3.1 CONNECTORS Following connectors are available on the 103250101: Figure 1 103250101 connectors 103250101 has four external connectors: 1. 2. 3. 4. 8-pin connector Power supply, CAN and I/O. Blue FAKRA Antenna connection for GNSS antenna. Violet FAKRA Antenna connection for main LTE antenna. 6-pin connector Analog inputs. Also test interface is available after modification of unit. 3.1.
Title Revision & Status Doc Id Distribution Page (No Pages) User Manual Rev 1.2 Released 1032-[Subject] Actia Group 3.2 POWER SUPPLY The 103250101 is designed to be powered by an external vehicle battery. Nominal supply voltages are 12, 24, 36, 48 V (depending on vehicle). The power supply range is 8-60V. 3.3 SIM INTERFACE The embedded modem can use an embedded SIM chip as a SIM source. 3.4 EXTERNAL ANTENNA 103250101 is certified to be used with an external roof mounted antenna. 3.
Title Revision & Status Doc Id User Manual Rev 1.2 Released 1032-[Subject] Actia Group Bd 7 (2600) 2620 – 2690 2500 – 2570 Bd 8 (900) 925 – 960 880 – 915 Bd 12 (700) 729 – 746 699 – 716 Bd 18 (800) 860 – 875 815 – 830 Bd 19 (800) 875 – 890 830 – 845 Bd 20 (800) 791 – 821 832 – 862 Bd 28 (700) 758 – 803 703 – 748 3.6 GNSS GNSS antenna input is the blue FAKRA connector. 3.6.
Title Revision & Status Doc Id User Manual Rev 1.2 Released 1032-[Subject] Actia Group 4 MECHANICAL DESIGN Figure 2 103250101 mechanical design COPYRIGHT © 2018 ACTIA NORDIC AB ACTIA Nordic AB SWEDEN info@actia.se www.actia.
Title Revision & Status Doc Id Distribution User Manual Rev 1.2 Released 1032-[Subject] Actia Group Page (No Pages) 5 FUNCTIONAL DESCRIPTION The following functions are available in the 103250101: • Allow log on and start a working pass. In some cases, the driver will need to perform a Pre-Operational check by answering questions that are handled by the 103250101 before starting the working pass.
Title Revision & Status Doc Id Distribution User Manual Rev 1.2 Released 1032-[Subject] Actia Group Page (No Pages) 6 INSTALLATION AND MAINTENANCE 6.1 INSTALLATION The product is factory fitted in trucks. It is not possible to buy this product separately. Please be aware that the antenna must be installed to provide a separation distance of at least 20cm from all persons. 6.2 MAINTENANCE The status of the product can be read via diagnostic connections using special workshop tools.
Title Revision & Status Doc Id Distribution User Manual Rev 1.2 Released 1032-[Subject] Actia Group Page (No Pages) 7 REGULATORY CERTIFICATIONS 7.1 USA (FCC) This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 7.1.
Title Revision & Status Doc Id Distribution User Manual Rev 1.2 Released 1032-[Subject] Actia Group Page (No Pages) 7.1.2 OEM Requirements Following text should be printed in the user manual for vehicles in US: Type Approval USA FCC ID: 2AGKK103250101 This device complies with Part 15 of the FCC rules.
