Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
ELS81-US Hardware Interface Description
4.3 Packaging
92
els81-us_hid_v01.004 2017-09-27
Confidential / Preliminary
Page 87 of 107
4.3 Packaging
4.3.1 Tape and Reel
The single-feed tape carrier for ELS81-US is illustrated in Figure 48. The figure also shows the
proper part orientation. The tape width is 44mm and the ELS81-US modules are placed on the
tape with a 32-mm pitch. The reels are 330mm in diameter with a core diameter of 100mm.
Each reel contains 500 modules.
4.3.1.1 Orientation
Figure 48: Carrier tape
Figure 49: Reel direction
44mm
330mm
Reel direction of the
completely equipped tape
Direction into
SMD machine
View
direction
Pad 1
Pad 1