Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.1.1 Pad Assignment
- 2.1.2 Signal Properties
- 2.1.3 USB Interface
- 2.1.4 Serial Interface ASC0
- 2.1.5 Serial Interface ASC1
- 2.1.6 Inter-Integrated Circuit Interface
- 2.1.7 UICC/SIM/USIM Interface
- 2.1.8 Enhanced ESD Protection for SIM Interfaces
- 2.1.9 Digital Audio Interface
- 2.1.10 Analog-to-Digital Converter (ADC)
- 2.1.11 RTC Backup
- 2.1.12 GPIO Interface
- 2.1.13 Control Signals
- 2.1.14 JTAG Interface
- 2.1.15 eMMC Interface
- 2.2 GSM/UMTS/LTE Antenna Interface
- 2.3 GNSS Antenna Interface
- 2.4 Sample Application
- 2.1 Application Interface
- 3 GNSS Interface
- 4 Operating Characteristics
- 5 Mechanical Dimensions and Mounting
- 6 Regulatory and Type Approval Information
- 7 Document Information
- 8 Appendix
Cinterion
®
ALAS5V Hardware Interface Description
5 Mechanical Dimensions and Mounting
107
ALAS5V_HID_v00.030a 2019-03-20
Confidential / Preliminary
Page 97 of 124
5 Mechanical Dimensions and Mounting
5.1 Mechanical Dimensions of ALAS5V
Figure 40 shows a 3D view
1
of ALAS5V and provides an overview of the board's mechanical
dimensions
2
. For further details see Figure 41.
Length: 40mm
Width: 36mm
Height: 3mm
Figure 40: ALAS5V – top and bottom view
1. The coloring of the 3D view does not reflect the module’s real color.
2. Note: The holes in the shielding (top view) are significantly smaller than the radiated wavelength from
the module. Gemalto guarantees that there will be no emissions outside the limits from these. The RF
circuitry of the module is fully shielded.
Top view
Bottom view