Specifications

FuzzyScan
Programming Manual
Configure Your FuzzyScan
32
PROGRAM
Operation Control
♦ Time-out Setting, Good Read Beep Duration ♦
M_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Auto Power Off Duration
SS
SS
SS
SS
Short

Medium
Long
Extremely long
0
1
2
3
Hands Free Time-out
SS
SS
SS
SS
Short

Medium
Long
Extremely long
0
1
2
3
Good Read Beep Duration
SS
SS
SS
SS
Short
Medium

Long
Extremely long
0
1
2
3

The Auto Power Off Duration is a pre-defined power off time out counter for Alternative Mode, Presentation Mode and Flash Mode. The scanner keeps the light source of
the scanner turned on and disable the infrared sensor till the pre-defined auto power off duration is up. You can adjust this parameter to meet your own application
requirement.

The Presentation Modes, Force Mode and Flash Mode are referred to as “hands free” modes. If the imager’s trigger is pulled when using a hands free mode, the imager
changes to manual trigger mode. You can set the time for imager to remain in manual trigger mode by setting the Hands Free Time-Out. Once the time-out value is up (if
there have been no further trigger pulls), the imager reverts to the original hands free mode.

The Good Read Beep Duration is a pre-defined duration of the beep which the imager emits on a good read (only available for Trigger Mode).