Specifications

FuzzyScan
Programming Manual
Configure Your FuzzyScan
31
PROGRAM
Operation Control
♦ Flash Duty Cycle, Redundancy, Delay Setting ♦
M_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Flash Duty Cycle
SS
SS
SS
SS
1/2 duty cycle

2/3 duty cycle
3/4 duty cycle
4/5 duty cycle
0
1
2
3
Redundancy (Scan Voting)
SS
SS
SS
SS
SS
SS
None
1 time

2 times
3 times
4 times
5 times
To prevent potential miss reading.
0
1
2
3
4
5
Reread Delay
SS
SS
SS
SS
SS
SS
Disable
Immediate time out

Short time out
Medium time out
Long time out
Force verification
0
1
2
3
4
5
Good Read Delay
SS
SS
SS
SS
SS
SS
SS
None

200 msec.
500 msec.
1 sec.
1.5 sec.
2 sec.
3 sec.
0
1
2
3
4
5
6

The Flash Duty Cycle is designed to control the flashing frequency of the light source.

The Redundancy is the number of times the same bar code label has to be decoded before it is transmitted.

The Reread Delay is designed to inhibit FuzzyScan from reading the same bar code label twice in pre-defined short duration. Force Verification will not allow reading of the
same bar code twice.

This Good Read Delay is the minimum amount of time before the imager can read another bar code.