Specifications

FuzzyScan
Programming Manual
Configure Your FuzzyScan
20
PROGRAM
Symbology Reading Control
♦ GS1 DataBar Setting ♦
M_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
GS1 DataBar Setting
SS
SS
SS
SS
SS
SS
Disable GS1 DataBar (RSS-14) decoder
Enable GS1 DataBar (RSS-14) decoder

Disable GS1 DataBar limited decoder
Enable GS1 DataBar limited decoder

Disable GS1 DataBar expanded decoder
Enable GS1 DataBar expanded decoder

0
1
2
3
4
5
GS1 DataBar Min. Length
SS
MS
Default (04)

01-Maximum
Only available for Expanded GS1 Databar.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
GS1 DataBar Max. Length
SS
MS
Default (74)

74-Minimum
Only available for Expanded GS1 Databar.
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)