Specifications

FuzzyScan
Programming Manual
Configure Your FuzzyScan
19
PROGRAM
Symbology Reading Control
♦ UK/Plessey & Telepen Setting ♦
M_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
UK/Plessey Setting
SS
SS
SS
SS
SS
SS
Select UK/Plessey Standard Format

Select UK/Plessey CLSI Format
Disable Convert X to A-F

Enable Convert X to A-F
Disable check digit transmission

Enable check digit transmission
0
1
2
3
4
5
UK/Plessey Min. Length
SS
MS
Default (04)

01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
UK/Plessey Max. Length
SS
MS
Default (98)

98-Minimum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
Telepen Setting
SS
SS
SS
SS
Select Telepen Numeric mode

Select Telepen Full ASCII mode
Disable check digit transmission

Enable check digit transmission
0
1
2
3
Telepen Min. Length
SS
MS
Default (04)

01-Maximum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
Telepen Max. Length
SS
MS
Default (98)

98-Minimum
Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)