Specifications

ManualsBrandsCino ManualsComputer equipmentFuzzyScan F700BT Series

FuzzyScan

Programming Manual

Configure Your FuzzyScan

PROGRAM

Symbology Reading Control

♦ Code 25 Family & German Post Code Setting ♦

M_DEFAULT

Family Code Selection P.C Parameter Selection Option Code

Code 25 Setting

Select any Code 25



Select Standard/Industrial 2 of 5 only

Select Matrix 2 of 5 only

Select Interleaved 2 of 5 only

Select Interleaved 2 of 5 S Code only

Select IATA only

Select China Postal Code only

Disable check digit verification



Enable check digit verification

Disable check digit transmission

Enable check digit transmission



Code 25 Min. Length

Default (06)



01-Maximum

Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate

this selection automatically.

FIN

(2 digits)

Code 25 Max. Length

Default (98)



98-Minimum

Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate

this selection automatically.

FIN

(2 digits)

German Postal Setting

Disable



Enable



The FuzzyScan can decode almost all Code 25 symbologies automatically. But we recommend that you select only one kind of Code 25 for reading, or set limited

maximum and minimum reading length for reading, because the encoding algorithm of Code 25 isn’t very good. To decode all Code 25 automatically or to read variable

length Code 25 will increase the error reading rate.