FUZZYSCAN FAMILY Quick Start Guide FM400 Series FIXED MOUNT SCANNER
Getting Familiar with Your FuzzyScan Thank you for choosing Cino FuzzyScan FM400 Series Fixed Mount Scanner. Integrated with the innovative FuzzyScan 2.0 Imaging Technology and durable ultra-compact design, FM400 series not only provides outstanding reading performance, but also meets various demands for both industrial and general purpose applications. This document provides a quick reference for installation and operation purpose. The complete documentation is available at www.cino.com.tw.
Connect to Your Host Both RS232 and USB interfaces are available in different models of FM400 series. Each model is equipped with corresponding connector to meet various application demands. USB Models (FM4xx-11x) The USB models provide a plug-and-play solution. Both USB HID and USB COM Port Emulation interfaces are available for user’s choice. 4-pin Type A Connector Pin No.
Install Your FuzzyScan Adjust Reading Angle The readability may be impacted by the specular reflection caused by the perpendicular reading angle. To get the most optimal reading performance, you are suggested to install the FM400 at an approximate 15° angle to the perpendicular line of the target barcode. However, the reading angle and distance may vary depending on the size and printing quality of barcodes.
Use the Test Mode The FuzzyScan FM400 provides an useful test mode which is helpful for you to quickly identify the best mounting position. Please refer to the descriptions listed below for details. Test Button Under normal operation, the Test Button of FM400 just acts as a normal trigger switch of hand-held scanner. You can press the Test Button to scan the corresponding barcode commands to configure your scanner with ease.
Use Your FuzzyScan Both FuzzyScan Barcode commands and Serial commands are available to configure your FM400. The FuzzyScan barcode commands are a series of proprietary barcodes which allow you to easily configure the scanner for most applications. Moreover, the FuzzyScan serial commands are ideal for precise and complicated reading control in machine-controllable environments. Please refer to the relevant documentations for details.
Trigger mode Under trigger mode, the scanner will turn on the light source to read barcode when it receives an external trigger or a serial trigger ON command. Once the external trigger has been released, or the scanner gets a good read or a serial trigger OFF command, the scanner will stop reading and wait for the next trigger to activate scanning again.
Host Interface Quick Set RS232 Serial USB HID Standard Mode USB HID Turbo Mode USB Com Port Emulation USB HID Interface Quick Set - Record Suffix - None RETURN ◆ TAB SPACE ENTER - Keyboard Layout - USA ◆ France Germany United Kingdom-UK Canadian French Spain Latin America Nertherlands Japan 7
Serial Interface Quick Set - Record Suffix None TAB LF CR ◆ SPACE CRLF - Baud Rate 38.4K BPS 1200 BPS 4800 BPS 19.
System Commands PROGRAM (Enter Programming Mode) END (Exit Programming Mode) System Information Factory Default Master Default PowerTool Host Link Save User Default User Default 9
USB HID Interface Control Command Keyboard Layout Record Suffix Parameter Selection Option Code USA ◆ France Germany United Kingdom-UK Canadian French Spain Sweden/Finland Portugal Norway Latin America Italy Netherlands Denmark Belgium Switzerland-Germany Iceland Japan Universal 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 99 None RETURN ◆ TAB SPACE ENTER User define character 0 1 2 3 4 5 Preamble None ◆ 1-15 characters FIN [00-7F], [FIN] Postamble None ◆ 1-15 characters FIN [00-7F],
Serial Interface Control Command Parameter Selection STX/ETX Control Option Code Disable STX/ETX transmission ◆ Enable STX/ETX transmission Record Suffix None CR ◆ LF CRLF 0 1 TAB SPACE User define character 4 5 6 0 1 2 3 Preamble None ◆ 1-15 characters FIN [00-7F], [FIN] Postamble None ◆ 1-15 characters FIN [00-7F], [FIN] Handshaking Protocol None ◆ RTS/CTS ACK/ NAK Xon/Xoff 0 1 2 3 Intermessage Delay None ◆ 1-99 (x5) msec. FIN (2 digits) Intercharacter Delay None ◆ 1-99 (x5) msec.
Operation Control Command Parameter Selection Option Code Inverse Reading Disable ◆ Enable 0 1 Redundancy None Level 1 ◆ Level 2 Level 3 Level 4 Level 5 0 1 2 3 4 5 Scan Voting Power On Indicator Disable (LED off) LED steady on ◆ LED flash 0 1 2 Buzzer Tone Control Buzzer tone – mute Buzzer tone – low Buzzer tone – medium ◆ Buzzer tone – high Buzzer tone – extremely high Power–on beep ◆ No Power–on beep 0 1 2 3 4 5 6 Good Read Duration Short Medium ◆ Long Extremely long Extremely short 0 1
Output Control Command Parameter Selection Option Code Dollar Sign Output Dollar sign output as “ $ “ ◆ Dollar sign output as “￥“ Dollar sign output as “ € “ Dollar sign output as “ £ “ Dollar sign output as “¢ “ 0 1 2 3 4 Good Read Delay None ◆ 200 msec. 500 msec. 1 sec. 1.5 sec. 2 sec. 3 sec.
Option Codes 0 A 1 B 2 C 3 D 4 E 5 F 6 7 FIN (Finish) 8 9 END (Exit) 14
www.cino.com.tw FuzzyScan Fixed Mount Scanner Quick Start Guide - FM400 Series International Edition, Rev. A P/N: YMAUB70010000R0 CINO GROUP PC WORTH INT’L CO., LTD. © Copyright PC Worth Int’l Co., Ltd. © Copyright Cino Group Disclaimer Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose.
