Fixed Mount Scanner FUZZYSCAN FAMILY Quick Start Guide FIXED MOUNT SCANNER
Getting Familiar with Your FuzzyScan Thank you for choosing Cino FuzzyScan Fixed Mount Scanner. Built with FuzzyScan 3.0 Imaging Technology, durable ultra-compact design and rich functionality, it provides an ideal barcode scanning solution for both industrial and general purpose applications. This document provides a quick reference for installation and operation. The complete documentation is available at www.cino.com.tw.
Connect to Your Host Both standard RS232 and USB interfaces are available in different models. Each model is equipped with corresponding connector to meet various application demands. USB Models (FM4xx-11x/FA4xx-11x) The USB models provide a plug-and-play solution. Both USB HID and USB COM Port Emulation interfaces are available for user’s choice. 4-pin Type A Connector Pin No.
Install Your FuzzyScan Adjust Reading Angle The readability may be impacted by the specular reflection caused by the perpendicular reading angle. To get the most optimal reading performance, it is recommended to install the scanner at an approximate 15° angle to the perpendicular line of the target barcode. However, the reading angle and distance may vary depending on the size and printing quality of barcodes.
Intelli Button For normal operation, the Intelli Button of the scanner acts as a manual Trigger Switch. You can press the Intelli Button to scan the corresponding barcode commands to configure your scanner with ease. Moreover, the useful Intelli Button can help you to identify the best mounting position. Please refer to following descriptions for more details.
Use Your FuzzyScan Both FuzzyScan Barcode commands and Serial commands are available to configure your scanner. The FuzzyScan barcode commands are a series of proprietary barcodes which allow you to easily configure the scanner for most applications. Moreover, the FuzzyScan serial commands are ideal for precise and complicated reading control in machine-controllable environments. Please refer to the relevant documentations for details.
Operation Mode area-imaging fixed mount scanner The details of each operation mode supported by FA470 area-imaging fixed mount scanner are listed below. Trigger Mode Under trigger mode, the scanner will turn on the light source to read barcode when it receives an external trigger or a serial trigger ON command.
Operation Mode linear fixed mount scanner The details of each operation mode supported by FM480 fixed mount scanner are listed below. Trigger Mode Under trigger mode, the scanner will turn on the light source to read barcode when it receives an external trigger or a serial trigger ON command. Once the external trigger has been released, or the scanner gets a good read or a serial trigger OFF command, the scanner will stop reading and wait for the next trigger to activate scanning again.
Host Interface Quick Set RS232 Serial USB HID Standard Mode USB HID Turbo Mode USB Com Port Emulation USB HID Interface Quick Set - Record Suffix - None RETURN ◆ TAB SPACE ENTER - Keyboard Layout - USA ◆ France Germany United Kingdom-UK Canadian French Spain Latin America Nertherlands Japan 8
Serial Interface Quick Set - Record Suffix None TAB LF CR ◆ SPACE CRLF - Baud Rate 38.4K BPS 1200 BPS 4800 BPS 19.
USB HID Interface Control Command Keyboard Layout Record Suffix Parameter Selection Option Code USA ◆ France Germany United Kingdom-UK Canadian French Spain Sweden/Finland Portugal Norway Latin America Italy Netherlands Denmark Belgium Switzerland-Germany Iceland Japan Universal 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 99 None RETURN ◆ TAB SPACE ENTER User define character 0 1 2 3 4 5 Preamble None ◆ 1-15 characters FIN [00-7F], [FIN] Postamble None ◆ 1-15 characters FIN [00-7F],
Serial Interface Control Command Parameter Selection STX/ETX Control Option Code Disable STX/ETX transmission ◆ Enable STX/ETX transmission Record Suffix None CR ◆ LF CRLF 0 1 TAB SPACE User define character 4 5 6 0 1 2 3 Preamble None ◆ 1-15 characters FIN [00-7F], [FIN] Postamble None ◆ 1-15 characters FIN [00-7F], [FIN] Handshaking Protocol None ◆ RTS/CTS ACK/ NAK Xon/Xoff 0 1 2 3 Intermessage Delay None ◆ 1-99 (x5) msec. FIN (2 digits) Intercharacter Delay None ◆ 1-99 (x5) msec.
Operation Control Command Redundancy Parameter Selection None Level 1 ◆ Level 2 Level 3 Level 4 Level 5 Option Code 0 1 2 3 4 5 Scan Voting Power On Indicator Disable (LED off) LED steady on ◆ LED flash 0 1 2 Buzzer Tone Control Buzzer tone – mute Buzzer tone – low Buzzer tone – medium ◆ Buzzer tone – high Buzzer tone – extremely high Power–on beep ◆ No Power–on beep 0 1 2 3 4 5 6 Good Read Duration Short Medium ◆ Long Extremely long Extremely short 0 1 2 3 4 Presentation Sensitivity Level 1
Output Control Command Parameter Selection Option Code Dollar Sign Output Dollar sign output as “ $ “ ◆ Dollar sign output as “￥“ Dollar sign output as “ € “ Dollar sign output as “ £ “ Dollar sign output as “¢ “ 0 1 2 3 4 Good Read Delay None ◆ 200 msec. 500 msec. 1 sec. 1.5 sec. 2 sec. 3 sec.
System Commands PROGRAM (Enter Programming Mode) Master Default System Information END (Exit Programming Mode) Save User Default PowerTool Host Link Factory Default User Default Option Codes 0 8 4 C 1 9 5 D 2 A 6 E 3 B 7 F FIN (Finish) END (Exit) 14
www.cino.com.tw FuzzyScan Fixed Mount Scanner Quick Start Guide International Edition, Rev. B1 P/N: YMAUB70010010R0 Disclaimer Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose. Cino shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication.
