Instruction Manual

8
▪ Empty podbin, rinse it and put back in place.
▪ Rinse water tank and fill it with 530ml (18oz) of clean water.
▪ Spout
Touch START to rinse the descaling agent from the internal pipes.
When the process is complete, wash all removable parts before the next preparation.
All information for a beverage preparation is contained in the CUBOPOD. After starting the process,
the CUBOPOD is registered and cannot be reused. If the CUBOPOD is unreadable for any reason,
the machine won’t start the preparation process.
The machine only prepares CUBO™ compatible pods, called CUBOPODS.
>> FUNCTIONAL INFORMATION
1. CUBOPOD reading
The machine enters sleep mode after 90 seconds without use. The screen turns off and the side LEDs
exhibit a breathing pattern. Any interaction with the lid or any removable part activates the machine.
After 15 minutes of non-use, the machine goes into power saving mode and will wake up only when the lid opens.
2. Sleep and Low power
The machine contains removable parts that must be cleaned frequently:
3. Removable parts