User guide
2. Press and hold the Play Button [7] for about 5 seconds until the Status Light [10] flashes blue and red alternately and 2
short tones are heard.
3. Then complete normal pairing process by following points 1 and 2 of the auto-pairing section above.
Please Note:
• Before pairing to a device, make sure the Headset is not connected to any device.
• You may connect the Headset with an audio source and a mobile phone simultaneously. Please refer to your mobile
phone/music-player manual for details regarding pairing/connecting Bluetooth enabled devices.
• Mobile phones should be connected before music players.
4. General Usage
The features marked with an asterisk will only work with Bluetooth phones which support the Hands-free profile. Today,
most Bluetooth phones support this profile.
Some Bluetooth Mobile phones may not have the ability to wirelessly stream music to a Bluetooth Stereo Headset. It is
not possible to stream FM radio to the headset from a mobile phone.
Changing Volume
To increase the volume, with the Headset on, press Volume + Button [5]. Once you reach the maximum level, a beep will
be heard each time the button is pressed. To decrease the volume, press the Volume - Button [6]. Once you reach the
minimum level, the Headset will mute.The Headset will remember all volume settings even when it is switched off.
Please note:
•Volume changes are only possible when playing music or within a call.
Accepting/rejecting
*
a call
When the phone rings (ring tone can be heard in Headset), extend the Microphone [4] entirely to accept the call. If the
microphone is already extended, retract it completely and then fully extend it. Alternatively, press and hold the Play Button
[7] for 1 second to reject the call, regardless of the position of the microphone.
Calls can also be accepted on the mobile phone. If your Headset is connected to the phone, depending on the phone, the
call may automatically be transferred to the Headset. If the call stays on the phone, press once the Play Button
[7] to transfer
it to the Headset.
If you are listening to music when you accept a call, the music will be paused during the call.
Please note:
•When extending or retracting the microphone, make sure no other button is inadvertently being held.
•When extending the microphone, make sure you completely extend it.
•The audio quality of your voice (as heard by the other party) will be improved by having the microphone fully extended
during a call.
Initiating a call from your mobile phone
Fully extend the Microphone [4] and dial the number as usual with your phone. If your Headset is on and the phone has
been correctly paired, it will transfer the call to your Headset.
Initiating a call with voice dialing
You may be able to initiate the voice dialing function from your Headset (your phone will need to support voice dialing and
voice tags need to be entered, please see your phone’s user guide). To activate, fully extend the Microphone [4] and press
the Play Button [7] one time. Once you hear the voice dial beep, you will be able to speak the name of the person you wish
to call, resulting in the call being initiated.
Ending a call
Fully retract the Microphone [4] during a call and the call will be ended. If the microphone is already retracted, extend it
completely and then fully retract it. To cancel an outgoing call, press and hold the Play Button [7] for one second.
Connecting / Disconnecting from the phone
*
You may wish to disconnect the Headset from the phone in order to reduce battery consumption. To do so, press the Play
Button [7] 3 times on the Headset when it is not in an active call and is not playing music. If you want to pick up a call, you
first need to re-connect the Headset. To do so, press the Play Button [7] twice again on the Headset.
Play / Stop music
**
To play music, press the Play Button [7] one time. To stop playing music, press the Play Button 2 times.