User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 76
value has been reached.
Send a text message to a cell phone
Selecting Send SMS message sends a text
message to the cell phone number designated in the
Phone number field. The text message is the text
set in the Message field.
A new text message will not be sent on alarm until
the reset value has been reached. Note: text
messaging must be enabled by NexSens Technology
before use.
Pulse iSIC DIO
Selecting one of the Pulse iSIC xxx alarm
options allows iChart to trigger a data logger to
exercise control functionality.
If you would like to implement iSIC controls on a
data logger based on a parameter that data logger
is logging, it is best to use a Control Output alarm
instead of an iChart alarm.
The real advantage of this kind of iChart alarm is
it allows you to control a data logger based on a
parameter from another location. For example if
an upstream site detects a certain amount of
turbidity in the water, this iChart alarm can be
used to initiate a sampler on a downstream data
logger.
The iSIC ID field is the data logger you would like
the alarm to trigger. This is the number in the
bracket next to the data logger (ie enter „1‟ in the
iSIC ID field if the data logger name in the
navigation panel is „3100-iSIC[1]‟).