User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 74
A window will appear that allows you to select the type of alarm you would like to use. Click on
the drop down menu and select one of the following alarms. After you have set up the alarm
action you can go back and setup the second alarm or
Acknowledging an Alarm
When ever an alarm triggers, an Alarm Toolbar will be displayed. This tool bar allows you to
acknowledge the alarm, and stop it from carrying out until the reset point is reached. Click on
the picture of the speaker with a red circle to end the alarm.
Alarms can be temporarily disabled without deleting alarm setup information by clicking Edit and
then unchecking the Enable box.
Generate a sound on the computer speaker
Selecting Sound PC speaker will generate a
continuous computer beep until the alarm is
acknowledged.
Flash a warning message on the computer
Selecting Flash message will flash the message
specified in the Message field until the alarm is
acknowledged.