User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 71
3.6 Alerts and Alarms
iChart software allows several kinds of alerts and alarms to be setup and used with iSIC data
loggers:
1. iChart Alarms: these alarms are used to notify persons via SMS text messaging or
email of parameters exceeding pre-defined parameter limits. iChart sends the alarm
when it receives data from a data logger.
2. Control Outputs: these alarms are used to control devices via 5V DIO or 12V switches.
An iSIC data logger controls the device when it receives data from sensors that exceed
pre-defined parameter limits.
3. iSIC Alarms: these alarms are used to change the functionality of the data logger based
on parameter inputs, such as changing sample and log intervals based on a particular
logged reading.