User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 61
3.2.3 Step 3 – Sensor Setup
After selecting a data logger, click Next and select the sensor manufacturer from the drop-down
list of manufacturers. Then select the model number associated with your device and click Add.
If the sensor you are adding is not in the list, select Generic as the manufacturer and click on
the sensor type.
The Sensor Properties dialog box will come on the screen. Fill in the required sensor
information. Most sensors will already have all of their information provided and you will simply
need to select the address, channel, or port the sensor uses. Click Show Detail to show options.
*Note: find specific sensor information, including generic sensor type information online:
http://www.nexsens.com/support/user_manuals.htm