User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 60
3.2.2 Step 2 – Data Logger & Telemetry
The next step is to add the data logger(s) to the sites created in the previous step. Select a site
to add a data logger to. Then select the data logger model number from the list at right and click
Add.
The iSIC Data Logger Communication Properties dialog box will appear. Enter the required
iSIC data logger connection information (see below for model-specific instructions) to finish
adding the data logger to the selected site. When complete, click OK.
For an iSIC data logger, enter the iSIC address and enter the IP address and the port of the
3100-iSIC. The default port is typically 500.
 The iSIC address is typically „1‟. If unknown, enter „0‟ and click Test Connection to
determine the address.
 Select Direct to PC if connecting directly to the data logger instead of via Cellular
telemetry.