User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 58
3 iChart Setup and Operation
3.1 iChart Software and iSIC Firmware Updates
NexSens periodically releases new versions of iChart software and iSIC firmware to be
downloaded free of charge. The updated versions typically add new features, improve existing
features, and/or add more reliability to the system. It is important that iChart is updated to the
latest version before connecting a new sensor to your iSIC data logger. Your computer will
require internet access to update automatically.
To obtain the latest versions of software and firmware, in iChart, go to Help |
Check for Updates:
iChart will check the NexSens website for a more up to date version of software.
If you are running the latest version iChart will let you know.
Otherwise it will ask you if you would like to update, and then begin to do so automatically.
After obtaining the latest software, you can then perform a code update on an iSIC data logger.
Select Advanced | iSIC | Code Update to open the Code Update
Select 3100-iSIC as the connection type and enter the 3100-iSIC data logger‟s IP address and
port, as well as the iSIC address (which is typically 1 unless changed).
When iChart is finished updating the iSIC firmware, simply click Done and continue with normal
operation.