User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 37
2.5 SDI-12
Connect SDI-12 sensors to the pin labeled „SDI-12‟ on the Digital terminal strip. A sample wiring
diagram is below:
Multiple SDI-12 Sensors can be wired to the same digital terminal strip. See the following page
for more information. Up to ten SDI-12 devices can be connected to the SDI-12 pin on the iSIC
Data logger. Any NexSens iSIC data logger can “pass-through” telemetry and allow SDI-12
commands to be sent directly to the sensor.