User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 24
1.4.5 Activating a Sprint iDEN 3100-iSIC Cellular Modem
There is a single step in activating a Sprint iDEN modem. After a Sprint 3100-iSIC data logger is
received it will need to be activated with the account information as detailed in this section.
Connect the 3100-iSIC modem:
7. Connect the supplied A77 3100-iSIC modem programming cable to an open PC COM port
and the modem cable as indicated in the picture on the following page.
8. Attach the antenna and RF cable to the N-style connector on the 3100-iSIC enclosure
9. Apply power to the iSIC and run iChart software, following the steps detailed in the next
section.
Note: If the PC you are using does not have a COM port you can use a USB to COM port adapter,
***Note: do not perform these steps if a cellular account has not yet been setup***