User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 23
After installation, select “Start | All Programs | AirLink Communications | Wireless Ace 3G”.
Click on the connect button, select PPP and select the COM port the A77 modem cable is
connected to.
Click OK and Wireless Ace will scan the selected COM port for a connected modem. NexSens
3100-iSIC modems communicate at “9600 baud (AT Escape)”.
Once connected, click on the GPRS tab and look at the *NETAPN and +CGDCONT values. The
default values of “Internet” and “1,IP,Internet” should work in most cases, but check with your
service provider for the APN and PDP context that is required for where the modem is installed.