User`s manual

NexSens Technology, Inc.
iSIC User‟s Manual 16
1.4.3 Activating a Verizon CDMA 3100-iSIC Cellular Modem
After a Verizon CDMA 3100-iSIC data logger is received it will need to be activated with the
account information as detailed in this section.
Connect the 3100-iSIC modem:
1. Connect the supplied A77 3100-iSIC modem programming cable to an open PC COM port
and the modem cable as indicated in the picture on the following page.
2. Attach the antenna and RF cable to the N-style connector on the 3100-iSIC enclosure
3. Apply power to the iSIC and run Wireless ACE 3G software, detailed in the next section.
Note: If the PC you are using does not have a COM port you can use a USB to COM port adapter,
which can be obtained at a local Radio Shack.
After receiving the necessary information from your service provider and all phone
numbers or IP addresses are activated, install the software programs Wireless
ACE 3G and the Verizon Setup Wizard. These programs are included with your
cellular modem in the 3100-iSIC Verizon Companion CD located on the web at:
http://www.nexsens.com/support/downloads.htm and all settings and options of
the modem can be accessed using it.
Note: Wireless ACE 3G is also available for download at www.sierrawireless.com.
***Note: do not perform these steps if a cellular account has not yet been setup***