User guide

Pocket Verifier • Smartphone Edition • User Guide and Tutorial 13 of 27
Set Up the COM Port for Pocket Verifier
1. Start Pocket Verifier.
2. Logon and go to the Main Index screen.
3. Select Settings.
4. Select Menu > Select COM Port…
5. Choose the COM Port that you used above (for example COM7).
6. Select Done.
7. When asked to confirm your connection, select Yes.
At the next prompt, make sure the Pocket Spectrum is on and continue.
It is also recommended that you perform a small print test at this stage to make
sure your Pocket Spectrum is functioning properly before using it in the field.
After a brief pause the Pocket Spectrum will be setup.
Important Note: If this is the first time you are setting up the Pocket Spectrum or have removed
the Bluetooth connection by resetting the Pocket Spectrum, we recommend that you perform a
print test. In some cases the Pocket Spectrum will feed the paper continuously from the unit. If this
happens, remove the battery from the Pocket Spectrum. Replace the battery, turn on the unit and
perform another print test. The unit should function as expected.
8. Select Done to exit the Settings screen and return to the Main Index.