User guide

Pocket Verifier • Smartphone Edition • User Guide and Tutorial 11 of 27
Setup the Serial Port Service and COM Port
Once you have established a connection between the Pocket Spectrum and your phone,
the Services screen will appear. If it does not, you may have entered an incorrect passkey
or the battery on the Pocket Spectrum or phone may not be fully charged. In most cases,
re-entering the passkey and/or charging the devices will avoid this problem.
This section is a continuation from the previous section: Setup a Bluetooth Connection
with your Phone.
15. Select Serial Port.
16. Then select Done.
At this point you may be presented with one of the two screens shown below.
If you previously paired the Pocket Spectrum with the phone, the COM Port will
already be assigned and displayed. If this is the first time you are pairing the two
devices, then you will need to setup a COM Port connection.
New Pairing COM Port assigned from a previous pairing